BPI-JBM-Single-end External Cooling Mechanical Seal
BPI-JBM-Single-end External Cooling Mechanical Seal
7*24 Online!
sale@betaprimeindustry.com
WA:+86189 8077 6200
Regular price
$100.00 USD
Regular price
Sale price
$100.00 USD
Unit price
per
TT, Paypal, LC Payment Acceptable.
Contact us to get discounts.
Typical Applications:
Medium: Gypsum slurry, etc.
Pressure: <1 MPa;
Temperature: <120 °C;
Linear Speed: <10 m/s;
Structural Features:
The mechanical seal structure is a single-end face containerized type with an external cooling design. It has a lockplate drive for reliable transmission.
For specific material selection, please consult Beta Prime Industry.
Instructions for Use:
During installation, lubricating oil should be applied to the inner hole of the sleeve and the O-ring to facilitate installation.
Cooling water can be ordinary tap water, with pressure controlled below 0.05 MPa; generally, achieving flow is sufficient. The inlet is preferable to be from the top and the outlet from the bottom.
View full details
Medium: Gypsum slurry, etc.
Pressure: <1 MPa;
Temperature: <120 °C;
Linear Speed: <10 m/s;
Structural Features:
The mechanical seal structure is a single-end face containerized type with an external cooling design. It has a lockplate drive for reliable transmission.
For specific material selection, please consult Beta Prime Industry.
Instructions for Use:
During installation, lubricating oil should be applied to the inner hole of the sleeve and the O-ring to facilitate installation.
Cooling water can be ordinary tap water, with pressure controlled below 0.05 MPa; generally, achieving flow is sufficient. The inlet is preferable to be from the top and the outlet from the bottom.